Cutting Through the Noise: PHP2Shell's Impact on Storage and Backup – Core6
Yaniv Valik

Cutting Through the Noise: PHP2Shell’s Impact on Storage and Backup

  • October 29, 2026
  • 8 min read

About Core6™

StorageGuard - by Core6 - is the ONLY Security Posture Management solution for Storage & Backup systems, helping to ensure these systems are secure and compliant.

Read more

Compiled from public sources, last checked October 29, 2026 (about 12:00 UTC). Scope: storage arrays, backup platforms, NAS, SAN fabrics and related management products. Always confirm with the vendor’s own advisory; full disclaimer at the end.

Eight days after PHP2Shell was disclosed, the picture of its impact on storage and backup systems is starting to come into focus. Several vendors have confirmed impacted products, while others have formally cleared their portfolios. We’re sharing this interim summary as a resource for the storage and backup community.

Array and backup management interfaces are web applications, often on embedded runtimes administrators can’t patch themselves. Compromising that plane is a direct path to data theft, snapshot deletion and ransomware staging.

What PHP2Shell is

Two critical flaws in the PHP engine itself: any product serving web requests on unpatched PHP is exposed, whatever its own code.

ItemDetail
CVEsCVE-2026-109618 (RCE via out-of-memory corruption), CVE-2026-109619 (RCE via stale global state)
SeverityCVSS v4.0 9.2 per PHP (some vendors publish CVSS v3.1 9.8); unauthenticated RCE
Fixed PHP8.2.35, 8.3.36, 8.4.27, 8.5.12 (Oct 21). No new releases for 8.1 and older; source-only backports exist for 7.4–8.1, and distributions ship backported builds
ExploitationIn CISA KEV since Oct 26 (federal deadline Oct 29); confirmed RCE so far is from honeypots on single-worker mod_php
RelatedCVE-2026-115560 (disclosed Oct 23) is not fixed by the Oct 21 releases; PHP recommends session.upload_progress.enabled=0 until the next regular release

Interim settings reduce exposure but don’t fix it; on appliances, follow the vendor’s remediation rather than replacing embedded PHP. Backported builds often keep the old version string and some products carry PHP packages without a PHP web service, so version-only scans mislead in both directions.

Ten vendors have identified impacted products

Ten storage and backup vendors have publicly identified impacted products as of October 29, 2026 (nine through security advisories or release notes; TerraMaster through a support-team forum announcement). Affected versions, fixed releases and workarounds are in each vendor’s advisory.

VendorProductAdvisory
ASUSTORADM systems with PHP installed (Web Server)AS-2026-023
CTERAEdge FilerCTERA release notes
DellCyber Detect for PowerProtectDSA-2026-475
HPECray ClusterStor Data Services, HPE Data Management Framework 7HPESBGN05174
NetAppONTAP 9 (CVE-2026-109618 only; hotfixes available)NTAP-20261021-0021, workaround KB
OracleOracle Secure Backup (CVE-2026-109618 only)Oracle Security Alert
QNAPQTS, QuTS hero, QuTScloud, QuMagie, Notes Station 3, QNE (ADRA), QVR Surveillance on ARM32 models, TVR OSQSA-26-18
QuantumStorNext Unified UI on Xcellis; older Xcellis with bundled PHP / StorNext Connect; Myriad with UUI; H4000 and QBSP with UUI; Scalar i3, i6, i6H, i7 RAPTOR; ActiveScale Cold Storage (via its Xcellis and Scalar components)Quantum bulletin
SynologyPHP packages, Mail Station, Synology Calendar and PHP-dependent packages (DSM’s built-in PHP is not externally exposed per Synology; a DSM patch is planned)Synology-SA-26:14, statement
TerraMasterAll TOS 5 and TOS 6 systems (remediation is upgrading to TOS 7); TOS 7 systems with the PHP package or PHP-dependent apps installed; PHP containers in Container Manager. TOS 7 without PHP is not affectedPHP Critical Vulnerability Fix Announcement (forum post by TM Support, Oct 26)

Affected versions, fixed releases and workarounds change as vendors update their advisories, so refer to the linked advisory for current details.

Some vendors have cleared specific products

These vendors have publicly stated that the listed products are not affected. Some vendors appear in both tables, split by product. Sources are vendor advisories except where marked as a vendor statement (Acronis blog, Synology statement, TrueNAS impact statement).

VendorProductAdvisory
AcronisAcronis Cyber ProtectAcronis blog
Brocade (Broadcom)Fabric OS, SANnav, ASCG (component not present)BSA-2026-4115
CiscoNX-OS Software (incl. MDS 9000), Nexus Dashboard, all UCS Softwarecisco-sa-php-october26-Jj384Daq (v1.9 Final, Oct 28)
DellPowerMax, PowerStore, PowerScale / OneFS, Unity, PowerFlex, ObjectScale, VPLEX, Unisphere, Solutions Enabler, Storage Resource Manager, PowerProtect Data Domain, PowerProtect Data Manager, PowerProtect Cyber Recovery, PowerProtect Backup Service, Avamar, NetWorker, RecoverPoint for VMs, Data Protection Advisor, Data Protection Central, Connectrix, SANnav, VxRail. Dell notes some evaluations are still underwayDSN-2026-003 (v7, Oct 26)
HYCUAll HYCU productsHYCU response note
QuantumDXi 4.x / 5.x / 6.x (PHP packages present as CLI dependencies only, no PHP web service), ActiveScale software, StorNext software and GUI, StorNext NAS / Appliance Controller, FlexSync, Scalar i500, Scalar i6000, SuperLoader 3, Scalar Key Manager, QXS, H Series, F Series, CatDV, video surveillance productsQuantum bulletin
Studio Network SolutionsEVO v7 and EVO SuiteSNS advisory
SynologySynology DriveSynology statement
TrueNAS (iXsystems)TrueNAS CE/Enterprise, TrueNAS CORE, TrueNAS Connect (no PHP shipped; PHP apps in containers are separate)TrueNAS impact statement
VeeamAll Veeam products and Veeam SaaS solutionsKB4953

A vendor’s “not affected” statement applies only to the products, versions, deployment models and components it names. Separately installed PHP runtimes or third-party applications on the same host need their own assessment.

Under investigation or no public storage-specific statement

Two vendors have published general PHP2Shell advisories that name no storage products, and for the others we could not locate a public product-level determination as of October 29. Treat all of these as unknown, not safe.

VendorStatusAdvisory
HuaweiPublic security notice issued October 22 with no product list; the detailed advisory is behind a customer login, so affected storage products may be listed there. We do not know.Huawei security notice
IBMOnly product-specific bulletins found (e.g. API Connect); no statement covering FlashSystem, Storage Scale, Storage Protect, Storage Defender or DS8000IBM bulletin (API Connect)

No public product advisory was found for:

  • Arctera/Veritas
  • Bacula Systems
  • Ceph (Red Hat and IBM Storage Ceph)
  • Cloudian
  • Cohesity
  • Commvault
  • DDN
  • Druva
  • FalconStor
  • Fujitsu
  • Hitachi Vantara
  • Index Engines (CyberSense)
  • Infinidat
  • MinIO
  • NAKIVO
  • Nasuni
  • Nutanix
  • Oracle (ZFS Storage Appliance, Exadata, Zero Data Loss Recovery Appliance)
  • Panzura
  • ProLion
  • Pure Storage
  • Qumulo
  • Rubrik
  • Scality
  • Silk
  • Superna
  • UGREEN
  • VAST Data
  • Violin
  • WEKA

One of these deserves a direct question: Dell’s Cyber Detect for PowerProtect is the Dell-branded CyberSense from Index Engines, and Dell’s DSA-2026-475 says Cyber Detect releases before 8.13 are affected, so CyberSense customers who bought directly should confirm their status with Index Engines.

This is a search result, not a vendor status: we reviewed each vendor’s public PSIRT or security-advisory pages and public web-search results. Advisories available only through authenticated support portals are not represented, so absence here does not mean a product is unaffected; check with the vendor.

Cohesity has published PHP2Shell guidance on using backup snapshots to find vulnerable PHP runtimes in protected workloads (Cohesity REDLab), but that is detection guidance, not a statement on its own products. For vendors in this list, check their PSIRT pages directly or open a support case.

What this looks like with StorageGuard

PHP2Shell is a reminder that storage and backup appliances carry their own software supply chain, and that the management plane is a critical attack surface. StorageGuard continuously assesses the security posture of enterprise storage and backup systems against a continuously updated knowledge base of automated checks covering over 5,800 system and security configurations and vulnerabilities.

Check your own estate: Take the Enterprise Storage Security Self-Assessment

Talk to an expert: Book a conversation with the Core6 team

Sources

All sources are public. Product-impact determinations rest on vendor advisories and first-party vendor statements. PHP and government sources are used for vulnerability characteristics and exploitation status. Community trackers and media reports are listed separately and are not treated as vendor confirmation.

Vendor advisories

Background and tracking

About this post

This post is based solely on publicly available sources as of October 29, 2026, and is provided as a resource for informational purposes only. Vendor statements may change as investigations progress. Always rely on each vendor’s own security publications for the most accurate and up-to-date information on affected products, versions and remediation. Core6 makes no representation or warranty as to the accuracy, completeness or timeliness of this information and accepts no liability for actions taken based on it.

Talk To An Expert

Ensure your storage & backup systems are hardened and compliant.

We use cookies to enable website functionality, understand the performance of our site, provide social media features, and serve more relevant content to you.
We may also place cookies on our and our partners’ behalf to help us deliver more targeted ads and assess the performance of these campaigns. You may review our
Privacy Policy I Agree